Skip to product information
1 of 1

Kaddie Shack

Norris Performance Camshaft, Grind #352S - Type 1 Engines

Norris Performance Camshaft, Grind #352S - Type 1 Engines


Regular price $149.95 USD
Regular price Sale price $149.95 USD
Sale Sold out

Norris has been making performance VW cams since the early 60's, and are pioneers since the very early days of VW racing.  To this day, they make some of the very best cams around, matching them to almost any VW engine configuration. We're proud to carry a full selection of these cams in stock, and can special order even more for specific racing applications.  From bone stock, to all out drag racing, we have a Norris cam that matches your exact needs.

All Norris cams are manufactured from the highest quality proferal billets, and will work with 40HP engines, single port 1600 or dual port 1600 based builds.  All Norris cams require the early "flat" style cam gear.  Each cam comes with the three correct bolts to secure it to the gear.  We have several different cam gears available as an option that match these cams well  The USA-made aluminum cam gears work fine on most any application, except engines that are equipped with dual valve springs and revved higher than 6000 RPM's.  For the more mild applications, EMPI cam gears will work fine, too.  If you want the utmost in performance, steel straight-cut cam gears work excellent on any engine and any RPM range.  Since they are straight cut, they will eliminate the thrust load on the cam bearings, freeing up some power and minimizing wear.  Straight-cuts do make a very distinctive "whine" sound, which some people really like, and others don't.

Norris no longer makes lifters, we recommend using quality Scat lifters, as these have proven to match these cams very well.  We have two different lifters that we use to match them.  The standard lifters work great for most any application.  The lightweight 75-gram lifters also come with an oiling hole in the center that lubricated the camshaft.  For racing applications, using a lightweight valve train and this extra oiling will help keep things working well together, particularly at higher RPM's.

Lobe centers are all ground at 107 degrees for maximum power in the low RPM range, all the way up to whichever power band you choose the cam to match.

Full technical info available at

#352S - THE "MILEAGE MAKER" - This cam was originally designed for stock engines.  The cam design adds pep to any stock VW engine, even with a stock carburetor.  It will add smooth performance and drivability without sacrificing any mileage.  In fact, you'll probably realize even better mileage than stock!  This is the perfect cam for your stock or mild build. Idles smooth. Instant throttle response.  Split lifts between intake and exhaust lobes.  Engle does not make a similar cam. This cam can be used with stock (1.1:1) rockers or any ratio: 1.25, 1.4 shown. Super smooth to 5000 RPM's.  We've used this cam very successfully with dual carbs for engines that have stock valved heads and small exhaust to provide great driveable torque in the lower range of the power band when not wanting to over-rev an engine.

254 degrees -- 218 degrees -- .352 intake -- .387 intake -- .440 intake -- .493 intake
254 degrees -- 218 degrees -- .330 exhaust  -- .363 exhaust -- .413 exhaust -- .462 exhaust